Investigation of the in situ thermal conductivity and absorption behavior of nanocomposite powder materials in laser powder bed fusion processes
One of the AM processes for direct manufacturing of metallic components is powder bed fusion of metals using a laser beam system (PBF-LB/M), in which metallic powders are molten and solidified in a layer upon layer manner by a focused laser beam. In recent years, the focus has initially been on increasing the efficiency of the systems itself.
Highlights
Stainless steel powder 1.4404 is successfully coated with silicon carbide and few-layer graphene.
The developed silicon carbide and few-layer graphene coated 1.4404 powder exhibits a decreased reflectance.
Silicon carbide (1 vol%) and few-layer graphene (0.75 vol%) coatings improve the relative density of upskin specimens to 99.9%.
The addition of silicon carbide (4 vol%) leads to a decrease in relative density of approx. 93.9%.
The few-layer graphene coating leads to a rapid heat dissipation into the already solidified underlying layers during the melting process.
However, the modification of standard AM metal alloys using nanoparticles offers the possibility to improve the PBF-LB/M-process concerning its process efficiency and actual densification and thermal conductivity. In this work, a methodology for an in-situ investigation of the thermal conductivity as well as the reflectance behavior of metallic powder materials during the PBF-LB/M-process is established. The powder material stainless steel 1.4404 was coated with different nanoparticles (few-layer graphene (FLG), silicon carbide (SiC)) and processed in a standardized build process.
As a result, the reflectance rate of all modified materials could be increased. Besides, the thermal conductivity of the material is attested to be a decisive and influencing factor for the quality of the final component. Thus, an improved relative density was achieved using the FLG/1.4404 and SiC/1.4404 (1 vol%) due to the increased thermal conductivity of the material. Also significant defects in the cross section were visible at SiC/1.4404 (4 vol%).
Download the full article as a PDF here or read it here
Article information: O. Pannitz, A. Lüddecke, A. Kwade, J.T. Sehrt. Investigation of the in situ thermal conductivity and absorption behavior of nanocomposite powder materials in laser powder bed fusion processes, Materials & Design, 2021. https://doi.org/10.1016/j.matdes.2021.109530.