Effect of Physical Properties and Chemical Substitution of Excipient on Compaction and Disintegration Behavior of Tablet: A Case Study of Low-Substituted Hydroxypropyl Cellulose (L-HPC)
As final attributes of dosage form largely depend on the properties of excipients used, understanding the effect of physicochemical properties of excipients is important. In the present study, six grades of L-HPC with varying degrees of particle size and hydroxypropyl content and the influence of the grade on compaction as well as disintegration behavior were studied. All grades of L-HPC were compressed at different compression loads to achieve different tablet porosity. Compressibility and compactibility of L-HPC grades were evaluated using a modified Heckel equation and percolation model. Further effects of particle size and hydroxypropyl content of L-HPC on tablet porosity and disintegration time were evaluated using a 32 full-factorial design. From compaction studies, it was found that compressibility of L-HPC largely depends upon the particle size with lower particle size grade showing lower compressibility. Whereas consolidation/bonding behavior of L-HPC is independent of particle size and % hydroxypropyl content. By factorial design, it was found that particle size and % hydroxypropyl content have a significant effect on the disintegration behavior of L-HPC. It was found that smaller particle sizes and higher hydroxypropyl content of L-HPC show longer disintegration time. Thus, careful consideration of excipients selection should be made to achieve desired quality attribute of the product.
Continue reading here
About this article: Mishra, S.M.; Sauer, A. Effect of Physical Properties and Chemical Substitution of Excipient on Compaction and Disintegration Behavior of Tablet: A Case Study of Low-Substituted Hydroxypropyl Cellulose (L-HPC). Macromol 2022, 2, 113-130. https://doi.org/10.3390/macromol2010007