Highly soluble magnesium oxide for the food and supplement industry
What is magnesium oxide?
Magnesium oxide is a chemical compound with the formula MgO. Magnesium oxide is inorganic, consists of white crystals, and is normally insoluble in water. It has a high elemental magnesium content of approximately 58–60 % and can be used in food supplements where space is limited, such as tablets or capsules. It is also…
Spray-congealed Solid Lipid Microparticles for the controlled Bisphosphonates release
07. October 2017 Theaim of this work was to develop an innovative drug delivery system potentially useful for the local delivery of Bisphosphonates to bone tissue. We propose…
Fibrous Polymeric Buccal Film Formulation
07. October 2017 Polymer based dosages form the mainstay of drug delivery systems either as simple matrix carrier materials or active release behaviour modulating agents. In…
Formulation Development of SYN-004 (ribaxamase) Oral Solid Dosage Form
07. October 2017 SYN-004 (ribaxamase) delayed release drug product is a multi-particulate, hard capsule for oral delivery of a recombinant β-lactamase enzyme designed to degrade…
Advanced model predictive control system into continuous pharmaceutical tablet compaction process
07. October 2017 In the context of continuous pharmaceutical oral dosage manufacturing, a control system is essential to ensure that the critical quality attributes…
Opportunity and challenges of nasal powders
06. October 2017
In the field of nasal drug delivery, among the preparations defined by the European Pharmacopoeia, nasal powders facilitate the formulation of poorly water-soluble active compounds. They often display a…
Impact of new requirements on elemental impurities
06. October 2017 Spectrochemical elemental analysis of pharmaceuticals and raw materials used for their production will be in the nearest future an obligatory part of quality…
Improved Dissolution and Oral Bioavailability of Celecoxib by a Dry Elixir System
05. October 2017 The purpose of this study was to develop and evaluate a dry elixir (DE) system for enhancing the dissolution rate and oral bioavailability of celecoxib. DE…
The effects of excipient foods and emulsions on carotenoid bioaccessibility.
05. October 2017 Recently, increasing attention has been given to carotenoid bioaccessibility and bioavailability in the field of nutrition research. As a consequence of…
Thermal and Nonthermal Encapsulation Methods
05. October 2017 Encapsulation is a topic of interest across a wide range of scientific and industrial areas, from pharmaceutics to food and agriculture, for the protection…
Outsourcing Strategies: The Evolving role of CDMOs
05. October 2017
How can CDMOs play a better, more strategic role in the greater pharma supply chain and better serve their customers?
Instead of relying on organic market growth alone to propel…
Pharma Integrates 2017
04. October 2017
15–16 November at the Grange City Hotel, London
Early bird delegate rate of £995 + VAT
Call +44 (0) 20 8667 9551
More Information
Ideal Cures – finalist for the CPhI Pharma Excellence Awards 2017
04. October 2017 An innovative tablet coating formulation capable of reducing coating process time, energy and cost while maximizing the potential…
Mechanistic modeling of a capsule filling process
04. October 2017 Filling a dosator nozzle moving into a powder bed was investigated using the Discrete Element Method (DEM). Various particle diameters and contact properties…
Reformulation of Tablets to Resolve Sticking & Picking Issues
04. October 2017
Reformulation of Tablets to Resolve Sticking & Picking Issues
In this study, Metrics Contract Services was tasked with a complex re-formulation project. Briefly, the free-acid form of an API,…
EXCIPIENT REQUIREMENTS IN THE FORMULATION OF SOLID ORAL DRUG FORMS
A Capsugel paper on the search for physiologically unobjectionable coloring agents for pharmaceutical drug formulations in capsules. Comparative analysis between the caplet and capsules wherecapsules are shown to shorten development times.…
Optimal design of experiments for excipient compatibility studies
03. October 2017 A crucial stage in the development of medical drugs is to study which additives, usually called excipients, impact the active ingredient stability. This…
Investigation of novel supersaturating drug delivery systems of chlorthalidone
03. October 2017 Supersaturating drug delivery systems (SDDS), as solid dispersions (SDs), stand out among strategies to enhance bioavailability of poorly soluble drugs.…
Improving tableting of desloratadine via multicomponent crystal format
03. October 2017 We report the first multicomponent crystal of desloratadine, an important anti-histamine drug, with a pharmaceutically acceptable coformer of benzoic acid.…
10. Jahrestagung SAPP 2017 – 16.11.2017 in Zürich
03. October 2017 10. Jahrestagung SAPP 2017 Zürich Gerinnungsstörungen und Antikoagulation in Schwangerschaft und Stillzeit Information & Anmeldung…
Relevance of Lipid-Based Products in the Management of Dry Eye Disease
03. October 2017 Components of the ocular surface synergistically contribute to maintaining and protecting a smooth refractive layer to facilitate the optimal transmission of…
3D printing of tablets using inkjet with UV photoinitiation
02. October 2017 Additive manufacturing (AM) offers significant potential benefits in the field of drug delivery and pharmaceutical/medical device manufacture. Of AM…
Digestibility of solid lipid nanoparticles of glyceryl dibehenate
02. October 2017 Objective To evaluate the digestibility of Solid Lipid Nanoparticles (SLN) of glyceryl dibehenate prepared either with surfactants by ultrasonication or…
Developmental toxicity assessment of common excipients
02. October 2017 Higlights In vitro morphogenesis model is used to assess developmental toxicity of excipients. 6 common excipients, namely 3…
Glatt Pharmaceutical Services – your outsourcing partner welcomes you at CPhI!
02. October 2017 Learn more about our services from Product Development to Logistics Pharma Development & Manufacturing Services Experienced CDMO…
Textures for topical dosage forms – Dermacare
02. October 2017
DERMACARE A PALETTE OF TEXTURES FOR TOPICAL DOSAGE FORMS
Our emulsifiers can be used to create an exciting range of topical dosage forms with excellent texture and sensorial properties that will delight…
Excipients for Direct Compression – First Draft of List for Review
02. October 2017 There is a wide range of excipients for direct compression with different functions available in the market. pharma-excipients.ch is putting together a list…
pharma-excipients partners @CPhI
02. October 2017
During the upcoming CPhI show most of the Excipient Manufacturers will be in Hall 10.2 in which approx. 80 companies will expose. Others might be found dispersed in other Halls. Please find the indications…
Manufacture of fibrous dosage forms by wet micro-patterning and drying.
01. October 2017 Recently, we have introduced fibrous dosage forms prepared by the predictable deposition, or 3D-micro-patterning, of a drug-laden fibrous melt on a surface.…
Vitamin E TPGS vs. Amorphous Solid Dispersion as Oral Delivery Systems for Etoposide
01. October 2017 Vitamin E TPGS (TPGS) has both surfactant and P-glycoprotein(P-gp) inhibitory effects. While surfactants were previously found to cause solubility-permeability…
A multifunctional mineral excipient
01. October 2017 Orally disintegrating tablets (ODTs) are becoming increasingly important in the global pharmaceutical market for both prescription and over-the-counter…
Co-Suspension® Delivery Technology in pressurized metered-dose inhalers for multi-drug dosing
01. October 2017 Technologies for long-term delivery of aerosol medications in asthma and chronic obstructive pulmonary disease have improved over the past 2 decades with…
Regulatory Notes on Impact of Excipients on Drug Products and the Maillard Reaction
01. October 2017 In general, it is an important criterion that excipients remain inert throughout the shelf life of the formulated pharmaceutical product. However, depending on…
Detection of Lumps in Powder Blends by Inline NIR
30. September 2017 Within the pharmaceutical industry, inline near infrared (NIR) spectroscopy is one of the most commonly applied process analytical technologies to monitor…
Taste Masking: A unique Approach for Bitter Drugs
30. September 2017
Taste is the maximum valuable factor within the case of orally drugs administering. Flavor covering is a prerequisite for bitter tablets to better the patient compliance, particularly in the…