Breast Cancer Awareness Month 2024
Breast Cancer Awareness Month is an international health campaign that takes place every October. The Breast Cancer Awareness Month aims to raise awareness about breast cancer, encourage early detection, and support research and treatment. The initiative was started in 1985 as a partnership between the American Cancer Society and the pharmaceutical…
Design and Implementationof Continuous Pharmaceutical Manufacturing Processes
24. August 2016 Design and Implementationof Continuous Pharmaceutical Manufacturing Processes October 25 - 27, 2016 in London - UK by Academic Experts from Rutgers…
Preparation and Characteristics of a NovelSustained and Controlled Release Drug DeliveryDevice by…
23. August 2016 Preparation and Characteristics of a NovelSustained and Controlled Release Drug DeliveryDevice by Plasma Technique Introduction Increased complications and…
Nanostructured lipid carriers as robust systems for topical lidocaine-prilocaine release in…
23. August 2016 Abstract In dental practice, local anesthesia causes pain, fear, and stress, and is frequently the reason that patients abandon treatment. Topical…
Development of a screening method for co-amorphous formulations of drugs and amino acids
22. August 2016 Abstract Using amino acids (AA) as low molecular weight excipients in the preparation of co-amorphous blends with the aim to stabilize the drug in the…
Effect of temperature on the wetting behavior of hydroxypropyl methylcellulose in a twin-screw…
22. August 2016 Abstract Temperature has rarely been examined in twin-screw wet granulation despite the obvious capabilities of the extruder for operating at elevated…
Chitosan-clay matrix tablets for sustained-release drug delivery: Effect of chitosan molecular…
22. August 2016 Abstract Matrix tablets prepared using chitosan-clay microparticles with various molecular weights (MWs) of chitosan were characterized in terms of…
SOLUBILITY AND PERMEATION STUDIES USING SOLUPLUS® AND HPMC WITH A BCS CLASS II AMORPHOUS DRUG
22. August 2016
Summary of the Master Thesis
Indomethacin (IND) is classified in class II of the Biopharmaceutics Classification System (BCS), meaning it exhibits good permeability, but poor solubility. By using the…
Polymer-plasticizer compatibility during coating formulation: A multi-scale investigation
22. August 2016 Abstract During the formulation of solid dosage forms coating, plasticizers are added to the film forming polymer to improve the mechanical properties of…
Evidence of acceptability of oral paediatric medicines: a review
20. August 2016 Objectives The aim of this review was to map the currently available evidence on acceptability of oral paediatric medicines to aid in the selection of…
The impact of polymeric excipients on the particle size of poorly soluble drugs after pH-induced…
20. August 2016 Abstract Active pharmaceutical ingredients (APIs) with strongly pH-dependent aqueous solubility can face the problem of precipitating from solution when…
Hydroxyethyl Pachyman as a novel excipient for sustained-release matrix tablets
18. August 2016 Abstract This paper addressed the application of hydroxyethyl pachyman (HEP) as a novel matrix for sustained – release tablets, using diclofenac sodium…
Prediction of Tablet Dissolution from API and Excipient Polymer Properties
17. August 2016 Purpose: Modified-release (MR) matrix tablets are typically produced using hydroxypropyl methylcellulose (HPMC) as rate-modifying polymer. HPMC…
Design and development of Albizia stipulata gum based controlled-release matrix tablets in cancer…
16. August 2016 Abstract The present study deals with the development of natural macromolecule gum Albizia stipulata (AS) based novel pharmaceutical excipient for the…
Properties of mucoadhesive polymers and their use in tablets and other dosage forms
16. August 2016 This article describes how several specialty polymers are used to formulate swallowable (peroral), buccal, and sublingual tablets, as well as topicals,…
Continuous twin screw granulation of controlled release formulations with various HPMC grades
16. August 2016 Abstract HPMC is a popular matrix former to formulate tablets with extended drug release. Tablets with HPMC are preferentially produced by direct…
Unexpected solvent impact in the crystallinity of praziquantel/poly(vinylpyrrolidone) formulations.…
15. August 2016 Abstract The saturation solubility of PVP:PZQ physical mixtures (PMs) and solid dispersions (SDs) prepared from ethanol (E/E) or ethanol/water (E/W) by…
Glidant effect of hydrophobic and hydrophilic nanosilica on a cohesive powder: Comparison of…
15. August 2016 Abstract The methods used for flow characterization of a powder mass include the angle of repose (AOR), Carr index (CI), and powder flow tester (PFT). The…
Compaction equation and its use in the determination of compressibility of pharmaceutical materials
15. August 2016 P. Ondrejček, P. Svačinová, B. Vraníková, O. Holas, M. Rabišková,…
In Vitro and In Vivo Evaluation of an Oral Multiple-Unit Formulation for Colonic Delivery of Insulin
14. August 2016 Abstract A multiple-unit formulation for time-dependent colonic release of insulin was obtained by coating insulin and sodium glycocholate…
Amidated pectin/sodium carboxymethylcellulose microspheres as a new carrier for colonic drug…
14. August 2016 Abstract The colon is a promising site for drug targeting owing to its long transit time and mild proteolytic activity. The aim of this study was to…
Nanostructured Lipid Carriers for the Topical Delivery of Tretinoin
14. August 2016 Abstract Cosmetic skin care products currently in the market demonstrate an increasing trend towards antiaging products. Selection of the right…
Applications of Polymers as Pharmaceutical Excipients in Solid Oral Dosage Forms
13. August 2016 Abstract Over the last few decades, polymers have been extensively used as pharmaceutical excipients in drug delivery systems. Pharmaceutical polymers…
A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release…
13. August 2016 Abstract Purpose The fabrication of ready-to-use immediate release tablets via 3D printing provides a powerful tool to on-demand individualization of…
Lipid-associated Oral Delivery: Mechanisms and Analysis of Oral Absorption Enhancement
13. August 2016 Abstract The majority of newly discovered oral drugs are poorly water soluble, and co-administration with lipids has proven effective in significantly…
Taste acceptance of Captopril and Furosemide Extemporaneous Oral Pediatric Formulations among…
11. August 2016
Many pediatric patients require medications that are not available in age appropriate formulations, especially those with cardiovascular diseases. The use of a suitable vehicle is critical for the preparation…
The Effect of a Source Change for an Active Pharmaceutical Ingredient (API) or Excipient on the…
11. August 2016
The global cost of health care is increasing year after year, and one of the ways governments and health care providers are looking to reduce cost is by reducing the cost of drug products. The…
The 9th Edition European Pharmacopoeia: Maintaining high quality standards in a dynamic environment
11. August 2016
In July 2016, the EDQM released the 9th Edition of the European Pharmacopoeia (Ph. Eur.).
Compared to the 8th Edition, more than half of the 9th Edition is new or revised,…
Oral bioavailability enhancement through supersaturation: an update and meta-analysis
10. August 2016 Abstract Introduction: With the increasing number of poorly water-soluble compounds in drug discovery pipelines, supersaturating drug delivery systems…
Multi-methodological investigation of the variability of the microstructure of HPMC hard capsules
10. August 2016
Abstract
The objective of this study was to analyze differences in the subtle microstructure of three different grades of HMPC hard capsule shells using mechanical, spectroscopic, microscopic and…
Oral dosage form administration practice in children under 6 years of age: A survey study of…
10. August 2016 Abstract The purpose of this study was to interview paediatric nurses on administration issues using extemporaneous capsules and marketed capsules and…
Fluidized Bed Hot Melt Granulation with Hydrophilic Materials Improves Enalapril Maleate Stability
09. August 2016 Abstract This work aimed at developing enalapril maleate granules in order to improve its stability in solid dosage form. Granules were prepared by hot…
Tailoring the mucoadhesive and sustained release characteristics of mesalamine loaded formulations…
09. August 2016 Abstract Direct delivery of sustained therapeutic levels of mesalamine (MS) via rectal systems to manage distal forms of ulcerative colitis was studied.…
Influence of Several Excipients on Drug Release of Tablets Containing Resveratrol
09. August 2016 ABSTRACT For pharmaceu cal tablet produc on, there are lots of commercial excipients available. All these excipients in uence the drug release of tablet…
Formulation and dissolution kinetics study of hydrophilic matrix tablets with tramadol hydrochloride…
09. August 2016 Abstract The aim of this study is to present the possibility of using of co-processed dry binders for formulation of matrix tablets with drug controlled…