An experimental study on flow behaviour in suction filling of pharmaceutical powders
![An experimental study on flow behaviour in suction filling of pharmaceutical powders](https://www.pharmaexcipients.com/wp-content/uploads/2024/08/An-experimental-study-on-flow-behaviour-in-suction-filling-of-pharmaceutical-powders.jpg)
Die filling is a crucial step in the pharmaceutical tablet manufacturing process. For industrial-scale production using rotary presses, suction filling is typically employed due to its significant efficiency advantages over gravity filling. Despite its widespread use, our understanding of the suction filling process remains limited. Specifically, there is insufficient comprehension of how filling performance is influenced by factors such as suction velocity, filling velocity, and the properties of the powder materials. Building on our previous research, this study aims to further investigate the effects of powder properties and process parameters (e.g., filling velocity, suction velocity, fill depth) on suction filling behaviour.
Highlights
- Suction filling is critical for industrial tablet production but poorly understood.
- Critical velocity ratio is introduced to characterise the flow regimes.
- Full die fill achieved when filling-to-suction velocity ratio is below the critical velocity ratio.
- Insufficient fill resulted when velocity ratio exceeded critical velocity ratio.
- Targeting the critical velocity ratio optimizes die fill quality.
A systematic experimental investigation was conducted using a model suction filling system, considering both cohesive and free-flowing pharmaceutical powders. The effect of fill depth on the suction filling of these powders was examined at different filling and suction velocities. The results demonstrate that two distinctive flow regimes in suction filling can be identified: slow filling and fast filling. These regimes are delineated by a critical filling-to-suction velocity ratio. In the slow filling regime, the filling-to-suction velocity ratio is lower than the critical ratio, meaning that the filling phase is slower than the suction phase. Conversely, the fast filling regime occurs when the filling-to-suction velocity ratio exceeds the critical ratio, implying that the filling phase is faster than the suction phase. This study reveals, for the first time, that when the powder flow pattern during suction filling is dominated by plug flow, full die fill (i.e., the fill ratio equals unity) is achieved in the slow filling regime. However, in the fast filling regime, incomplete die fill is obtained. It is also found that when plug flow prevails during fast filling, the fill ratio has an inverse correlation with the filling-to-suction velocity ratio. This study further reveals that when the plug flow assumption is valid, the filling ratio at various fill-to-suction velocity ratios can be well predicted mathematically. Furthermore, it is also found that once the powder flow pattern differs from the ideal plug flow, which could be induced by the filling conditions and powder cohesion, the fill ratio can be overpredicted.
2.1. Materials
Two powders were considered: microcrystalline cellulose (MCC) of grade Celphere CP102 (Asahi Kasei Corporation, Tokyo, Japan) and lactose of grade Granulac 140 (Meggle Pharma, Wasserburg, Germany). These powders were chosen as examples of very free-flowing and cohesive powders, respectively, as reported in Zakhvatayeva et al. (2019a). MCC CP102 is a special celephrine grade of microcrystalline cellulose. Its particles are highly spherical in shape, which causes it to be highly free-flowing. Granulac 140 is a type of lactose monohydrate with fine, sharp-edged particles. It is marketed as being highly cohesive and compressible (Meggle, 2021), and is widely used as a tablet filler.
Download the full study Pre-proof as PDF here: An experimental study on flow behaviour in suction filling of pharmaceutical powders (Pre-proof)
or read it here
Omar Ismail, Chao Zheng, Thomas Chamberlain, Anastasiya Zakhvatayeva, Colin Hare, Edward Yost, Ariel R. Muliadi, Chuan-Yu Wu, An experimental study on flow behaviour in suction filling of pharmaceutical powders,
International Journal of Pharmaceutics, 2024, 124527, ISSN 0378-5173, https://doi.org/10.1016/j.ijpharm.2024.124527.
Looking for small(er) to medium production quantities of excipients?
Read more on EXCIPIO CHEMICALS here:
![Excipio Chemicals](https://www.pharmaexcipients.com/wp-content/uploads/2024/07/Excipio-Teaser-Bild-300x169.jpg)